• tlc171com.,tlc171com.官网唯一授权入口

  • 发布时间:2016-01-13 00:42 | 作者:yc | 来源:互联网 | 浏览:1200 次
  • tlc171com.,tlc171com.官网唯一授权入口

    Name: sysDescr体系描画

    Oid: 1.3.6.1.2.1.1.1

    Description: A textual description of the entity. This value should include

    the full name and version identification of the system's hardware type , sof

    tware operating-system , and networking software. It is mandatory that this

    only contain printable ASCII characters.

    Name: sysObjectID体系方针ID

    Oid: 1.3.6.1.2.1.1.2

    Description: The vendor's authoritative identification of the network manage

    ment subsystem contained in the entity. This value is allocated within the S

    MI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous me

    ans for determining `what kind of box' is being managed. For example , if ve

    ndor `Flintstones , Inc.' was assigned the subtree 1.3.6.1.4.1.4242 , it cou

    ld assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.

    Name: sysUpTime体系开机时候

    Oid: 1.3.6.1.2.1.1.3

    Description: The time (in hundredths of a second) since the network manageme

    nt portion of the system was last re-initialized.

    Name: sysContact体系授权

    Oid: 1.3.6.1.2.1.1.4

    Description: The textual identification of the contact person for this manag

    ed node , together with information on how to contact this person.

    Name: sysName体系名称

    Oid: 1.3.6.1.2.1.1.5

    Description: An administratively-assigned name for this managed node. By con

    vention , this is the node's fully-qualified domain name.

    Name: sysLocation体系所在方位

    Oid: 1.3.6.1.2.1.1.6

    Description: The physical location of this node (e.g. , `telephone closet ,

    3rd floor')

    Name: sysServices体系事务内容

    Oid: 1.3.6.1.2.1.1.7

    Description: A value which indicates the set of services that this entity pr

    imarily offers. The value is a sum. This sum initially takes the value zero

    , Then , for each layer , L , in the range 1 through 7 , that this node perf

    orms transactions for , 2 raised to (L - 1) is added to the sum. For example

    , a node which performs primarily routing functions would have a value of 4

    (2^(3-1)). In contrast , a node which is a host offering application servic

    es would have a value of 72 (2^(4-1) + 2^(7-1)). Note that in the context of

    the Internet suite of protocols , values should be calculated accordingly:

    layer functionality 1 physical (e.g. , repeaters) 2 datalink/subnetwork (e.g

    . , bridges) 3 internet (e.g. , IP gateways) 4 end-to-end (e.g. , IP hosts)

    7 applications (e.g. , mail relays) For systems including OSI protocols , la

    yers 5 and 6 may also be counted.

    Name: ifNumber收集接口数

    Oid: 1.3.6.1.2.1.2.1

    Description: The number of network interfaces (regardless of their current s

    tate) present on this system.

    Name: ifTable接口入口列表

    Oid: 1.3.6.1.2.1.2.2

    Description: A list of interface entries. The number of entries is given by

    the value of ifNumber.

    Name: ifEntry

    Oid: 1.3.6.1.2.1.2.2.1

    Description: An interface entry containing objects at the subnetwork layer a

    nd below for a particular interface.

    Name: ifIndex接口索引

    Oid: 1.3.6.1.2.1.2.2.1.1

    Description: A unique value for each interface. Its value ranges between 1 a

    nd the value of ifNumber. The value for each interface must remain constant

    at least from one re-initialization of the entity's network management syste

    m to the next re- initialization.

    Name: ifDescr接口描画

    Oid: 1.3.6.1.2.1.2.2.1.2

    Description: A textual string containing information about the interface. Th

    is string should include the name of the manufacturer , the product name and

    the version of the hardware inte

    Name: ifType接口类型

    Oid: 1.3.6.1.2.1.2.2.1.3

    Description: The type of interface , distinguished according to the physical

    /link protocol(s) immediately `below' the network layer in the protocol stac

    k.

    Name: ifMtu接口迩来收/发包长度

    Oid: 1.3.6.1.2.1.2.2.1.4

    Description: The size of the largest datagram which can be sent/received on

    the interface , specified in octets. For interfaces that are used for transm

    itting network datagrams , this is the size of the largest network datagram

    that can be sent on the interface

    Name: ifSpeed接口带宽

    Oid: 1.3.6.1.2.1.2.2.1.5

    Description: An estimate of the interface's current bandwidth in bits per se

    cond. For interfaces which do not vary in bandwidth or for those where no ac

    curate estimation can be made , this object should contain the nominal bandw

    idth.

    Name: ifPhysAddress接口地址

    Oid: 1.3.6.1.2.1.2.2.1.6

    Description: The interface's address at the protocol layer immediately `belo

    w' the network layer in the protocol stack. For interfaces which do not have

    such an address (e.g. , a serial line) , this object should contain an octe

    t string of zero length.

    Name: ifAdminStatus接口状况

    Oid: 1.3.6.1.2.1.2.2.1.7

    Description: The desired state of the interface. The testing(3) state indica

    tes that no operational packets can be passed.

    Name: ifOperStatus接口运转状况

    Oid: 1.3.6.1.2.1.2.2.1.8

    Description: The current operational state of the interface. The testing(3)

    state indicates that no operational packets can be passed.

    Name: ifLastChange接口运转时候

    Oid: 1.3.6.1.2.1.2.2.1.9

    Description: The value of sysUpTime at the time the interface entered its cu

    rrent operational state. If the current state was entered prior to the last

    re- initialization of the local network management subsystem , then this obj

    ect contains a zero value.

    Name: ifInOctets接口回收总字节

    Oid: 1.3.6.1.2.1.2.2.1.10

    Description: The total number of octets received on the interface , includin

    g framing characters.

    Name: ifInUcastPkts向高层通报的单传数据包数

    Oid: 1.3.6.1.2.1.2.2.1.11

    Description: The number of subnetwork-unicast packets delivered to a higher-

    layer protocol.

    Name: ifInNUcastPkts向高层通报的非单传数据包数

    Oid: 1.3.6.1.2.1.2.2.1.12

    Description: The number of non-unicast (i.e. , subnetwork- broadcast or subn

    etwork-multicast) packets delivered to a higher-layer protocol.

    Name: ifInDiscards损掉落回收包数

    Oid: 1.3.6.1.2.1.2.2.1.13

    Description: The number of inbound packets which were chosen to be discarded

    even though no errors had been detected to prevent their being deliverable

    to a higher-layer protocol. One possible reason for discarding such a packet

    could be to free up buffer space.

    Name: ifInErrors回收犯错包数

    Oid: 1.3.6.1.2.1.2.2.1.14

    Description: The number of inbound packets that contained errors preventing

    them from being deliverable to a higher-layer protocol.

    Name: ifInUnknownProtos不明协议包

    Oid: 1.3.6.1.2.1.2.2.1.15

    Description: The number of packets received via the interface which were dis

    carded because of an unknown or unsupported protocol.

    Name: ifOutOctets发送字节数

    Oid: 1.3.6.1.2.1.2.2.1.16

    Description: The total number of octets transmitted out of the interface , i

    ncluding framing characters.

    Name: ifOutUcastPkts高层请求单传发送包总数

    Oid: 1.3.6.1.2.1.2.2.1.17

    Description: The total number of packets that higher-level protocols request

    ed be transmitted to a subnetwork-unicast address , including those that wer

    e discarded or not sent.

    Name: ifOutNUcastPkts高层请求非单传发送包总数

    Oid: 1.3.6.1.2.1.2.2.1.18

    Description: The total number of packets that higher-level protocols request

    ed be transmitted to a non- unicast (i.e. , a subnetwork-broadcast or subnet

    work-multicast) address , including those that were discarded or not sent.

    Name: ifOutDiscards损掉削发送包数

    Oid: 1.3.6.1.2.1.2.2.1.19

    Description: The number of outbound packets which were chosen to be discarde

    d even though no errors had been detected to prevent their being transmitted

    . One possible reason for discarding such a packet could be to free up buffe

    r space.

    Name: ifOutErrors发送犯错数

    Oid: 1.3.6.1.2.1.2.2.1.20

    Description: The number of outbound packets that could not be transmitted be

    cause of errors.

    Name: ifOutQLen发送包行列长

    Oid: 1.3.6.1.2.1.2.2.1.21

    Description: The length of the output packet queue (in packets).

    Name: ifSpecific

    Oid: 1.3.6.1.2.1.2.2.1.22

    Description: A reference to MIB definitions specific to the particular media

    being used to realize the interface. For example , if the interface is real

    ized by an ethernet , then the value of this object refers to a document def

    ining objects specific to ethernet. If this information is not present , its

    value should be set to the OBJECT IDENTIFIER { 0 0 } , which is a syntatica

    lly valid object identifier , and any conformant implementation of ASN.1 and

    BER must be able to generate and recognize this value.

    Name: atTable包括收集地址到物理地址映射的地址传送表

    Oid: 1.3.6.1.2.1.3.1

    Description: The Address Translation tables contain the NetworkAddress to `p

    hysical' address equivalences. Some interfaces do not use translation tables

    for determining address equivalences (e.g. , DDN-X.25 has an algorithmic me

    thod) ; if all interfaces are of this type , then the Address Translation ta

    ble is empty , i.e. , has zero entries.

    Name: atEntry收集地址到物理地址映射的入口

    Oid: 1.3.6.1.2.1.3.1.1

    Description: Each entry contains one NetworkAddress to `physical' address eq

    uivalence.

    Name: atIfIndex有用映射入口

    Oid: 1.3.6.1.2.1.3.1.1.1

    Description: The interface on which this entry's equivalence is effective. T

    he interface identified by a particular value of this index is the same inte

    rface as identified by the same value of ifIndex.

    Name: atPhysAddress依托媒介的物理地址

    Oid: 1.3.6.1.2.1.3.1.1.2

    Description: The media-dependent `physical' address. Setting this object to

    a null string (one of zero length) has the effect of invaliding the correspo

    nding entry in the atTable object. That is , it effectively dissasociates th

    e interface identified with said entry from the mapping identified with said

    entry. It is an implementation-specific matter as to whether the agent remo

    ves an invalidated entry from the table. Accordingly , management stations m

    ust be prepared to receive tabular information from agents that corresponds

    to entries not currently in use. Proper interpretation of such entries requi

    res examination of the relevant atPhysAddress object.

    Name: atNetAddress物理地址对应的收集地址

    Oid: 1.3.6.1.2.1.3.1.1.3

    Description: The NetworkAddress (e.g. , the IP address) corresponding to the

    media-dependent `physical' address.

    Name: ipForwarding标识实体是不是IP网关

    Oid: 1.3.6.1.2.1.4.1

    Description: The indication of whether this entity is acting as an IP gatewa

    y in respect to the forwarding of datagrams received by , but not addressed

    to , this entity. IP gateways forward datagrams. IP hosts do not (except tho

    se source-routed via the host). Note that for some managed nodes , this obje

    ct may take on only a subset of the values possible. Accordingly , it is app

    ropriate for an agent to return a `badValue' response if a management statio

    n attempts to change this object to an inappropriate value.

    Name: ipDefaultTTL默许TTL

    Oid: 1.3.6.1.2.1.4.2

    Description: The default value inserted into the Time-To-Live field of the I

    P header of datagrams originated at this entity , whenever a TTL value is no

    t supplied by the transport layer protocol.

    Name: ipInReceives接口回收包总数

    Oid: 1.3.6.1.2.1.4.3

    Description: The total number of input datagrams received from interfaces ,

    including those received in error.

    Name: ipInHdrErrors因IP头犯错损掉落的包数

    Oid: 1.3.6.1.2.1.4.4

    Description: The number of input datagrams discarded due to errors in their

    IP headers , including bad checksums , version number mismatch , other forma

    t errors , time-to-live exceeded , errors discovered in processing their IP

    options , etc.

    Name: ipInAddrErrors因无效地址损掉落的包数

    Oid: 1.3.6.1.2.1.4.5

    Description: The number of input datagrams discarded because the IP address

    in their IP header's destination field was not a valid address to be receive

    d at this entity. This count includes invalid addresses (e.g. , 0.0.0.0) and

    addresses of unsupported Classes (e.g. , Class E). For entities which are n

    ot IP Gateways and therefore do not forward datagrams , this counter include

    s datagrams discarded because the destination address was not a local addres

    s.

    Name: ipForwDatagrams回收的转发包数

    Oid: 1.3.6.1.2.1.4.6

    Description: The number of input datagrams for which this entity was not the

    ir final IP destination , as a result of which an attempt was made to find a

    route to forward them to that final destination. In entities which do not a

    ct as IP Gateways , this counter will include only those packets which were

    Source-Routed via this entity , and the Source- Route option processing was

    successful.

    Name: ipInUnknownProtos回收但不明协议的包数

    Oid: 1.3.6.1.2.1.4.7

    Description: The number of locally-addressed datagrams received successfully

    but discarded because of an unknown or unsupported protoco